![]() |
|||
---|---|---|---|
PLAIN SNAP GAGES MODEL SC | |||
Frame No. | Capacity | EDP No. | |
Inches | mm | ||
1 | 0" - 1/4" | 0 - 6.4 mm | V701092 |
2 | 1/4" - 1/2" | 6.4 - 12.7 mm | V701093 |
2A | 1/2" - 3/4" | 12.7 - 19.1 mm | V701094 |
3 | 3/4" - 1" | 19.1 - 25.4 mm | V701095 |
3A | 1" - 1-1/4" | 25.4 - 31.8 mm | V701096 |
4 | 1-1/4" - 1-1/2" | 31.8 - 38.1 mm | V701097 |
4A | 1-1/2" - 1-3/4" | 38.1 - 44.5 mm | V701098 |
5 | 1-3/4" - 2" | 44.5 - 50.8 mm | V701099 |
5A | 2" - 2-1/4" | 50.8 - 57.2 mm | V701100 |
6 | 2-1/4" - 2-1/2" | 57.2 - 63.5 mm | V701101 |
6A | 2-1/2" - 2-3/4" | 63.5 - 69.9 mm | V701102 |
7 | 2-3/4" - 3-1/16" | 69.9 - 77.8 mm | V701103 |
7A | 3-1/16" - 3-7/16" | 77.8 - 87.3 mm | V701104 |
8 | 3-7/16" - 3-13/16" | 87.3 - 96.8 mm | V701105 |
8A | 3-13/16" - 4-3/16" | 96.8 - 106.4 mm | V701106 |
9 | 4-3/16" - 4-9/16" | 106.4 - 115.9 mm | V701107 |
9A | 4-9/16" - 4-15/16" | 115.9 - 125.4 mm | V701108 |
10 | 4-15/16" - 5-5/16" | 125.4 - 134.9 mm | V701109 |
10A | 5-5/16" - 5-11/16" | 134.9 - 144.5 mm | V701110 |
11 | 5-11/16" - 6-1/8" | 144.5 - 155.6 mm | V701111 |
11A | 6-1/8" - 6-5/8" | 155.6 - 168.3 mm | V701112 |
12 | 6-5/8" - 7-1/8" | 168.3 - 181.0 mm | V701113 |
12A | 7-1/8" - 7-5/8" | 181.0 - 193.7 mm | V701114 |
13 | 7-5/8" - 8-1/8" | 193.7 - 206.4 mm | V701115 |
13A | 8-1/8" - 8-5/8" | 206.4 - 219.1 mm | V701116 |
![]() |
|||
---|---|---|---|
PLAIN SNAP GAGE MODEL SMC | |||
Frame No. | Capacity | EDP No. | |
Inches | mm | ||
0 | 0" - 0.195" | 0 - 5.0 mm | V701136 |
00A | 0.195" - 0.385" | 5.0 - 9.8 mm | V701137 |
0 | 0.385" - 0.570" | 9.8 - 14.5 mm | V701138 |
0A | 0.570" - 0.760" | 14.5 - 19.3 mm | V701139 |
MODEL SC and MODEL SMC
Van Keuren Plain Snap Gages are adjustable limit gages ideal for gaging flat surfaces or parts still on machine centers. Our gages are available as unset or set and sealed in inch or metric capacities. Marking discs are supplied on all Van Keuren Snap Gages and we have holders available which will accommodate all sizes of plain frames.
Please specify capacity required or frame number in inch or metric and indicate if you require unset or set/sealed gages. Long Form Certification traceable to N.I.S.T. is available.
Snap Gage Holders are available for both models. The stand will handle all sizes of plain frames equally well. EDP No. V39320